Airaid 520-152 Manual do Utilizador descarregar pdf

Installation Instructions

For Part Numbers:

520-152 700-458 Airaid Oiled Media Filter

521-152 701-458 SynthaMax Dry Media Filter - Red

522-152 702-458 SynthaMax Dry Media Filter - Black

523-152 703-458 SynthaMax Dry Media Filter - Blue

2004-14 Nissan Titan / Armada

2004-10 Infiniti QX56

5.6L V8

Component Identification

1. Airaid Premium Filter 1

2. MAF Panel 1

3. Front Panel 1

4. Air Filter Adapter 1

5. Weather Strip 27” 1

6. 6 - 32 x 5/16” Screw 4

7. #6 Flat Washer 4

8. 6 - 32 Keps Nut 4

9. ¼ - 20 x ½” Button Head Bolt 2

10. ¼” Flat Washer 2

11. 8 - 32 x ½” SS Button Screw 2

1. Disconnect the negative battery cable.

Loosen the hose clamp on the factory intake tube.

Disconnect the Mass Air Flow (MAF) sensor wiring

harness from the sensor, and unclip the harness from

the air box lid.

3. Using a Phillips head screwdriver, remove two

screws and the MAF sensor from the factory air box

lid. Save the sensor for reuse.

6. Using two 8-32 x ½” SS button head screws

(#11), reinstall the factory MAF sensor into the air

filter adapter.

4. Remove the factory air box base from the vehicle.

Using a flat blade screwdriver, unsnap and remove

the factory tube from inside the air box base. Re-

install the factory air box base and the bolts into the

vehicle, without the tube.

7. Remove the clip from the factory air box lid and

install it in the Quick Fit Panels as shown.

9. Reconnect the MAF sensor wiring harness to the

sensor. Mount the factory wiring harness clip into

the hole in the Airaid Quick Fit panel.

5. Assemble the Airaid Quick Fit Panels (#2, #3)

using four 6-32 x 5/16” screws (#6), #6 flat washers

(#7), and 6-32 keps nuts (#8). Next, install the air

filter adapter (#4) using two ¼-20 x ½” button head

bolts (#9), and ¼” flat washers (#10).

8. Install the Quick Fit Panel assembly onto the fac-

tory air box base using the factory clips. Slip the

factory intake tube over the air filter adapter, and

then tighten the factory hose clamp.

2. Unclip the factory air box lid from the factory air

box base, and remove it from the engine compart-

ment. Remove the factory air filter from the air box

base. Using a 10mm socket, remove two bolts (three

on some vehicles) from the air box base (save for

reuse).

Clips

Bolt

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Resumo do Conteúdo

Página 1 - Component Identification

Installation Instructions For Part Numbers: 520-152 700-458 Airaid Oiled Media Filter 521-152 701-458 SynthaMax Dry Media Filter - Red 522-152 702

Página 2 - Tune-Up Kit!

11. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. 12.

Modelos relacionados 521-152 | 522-152 | 523-152 |

Comentários a estes Manuais

Sem comentários

Airaid 520-152 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Equipamento de ar Airaid 520-152. Airaid 520-152 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados 521-152 | 522-152 | 523-152 |

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento de ar Airaid 520-152